Thursday, 28 January 2016

Pass4sure 200-101 Question Answer

What is one benefit of PVST+?

A. PVST+ supports Layer 3 load balancing without loops.
B. PVST+ reduces the CPU cycles for all the switches in the network.
C. PVST+ allows the root switch location to be optimized per VLAN.
D. PVST+ automatically selects the root bridge location, to provide optimized bandwidth usage.

Answer: C

Which three statements are typical characteristics of VLAN arrangements? (Choose three.)

A. A new switch has no VLANs configured.
B. Connectivity between VLANs requires a Layer 3 device.
C. VLANs typically decrease the number of collision domains.
D. Each VLAN uses a separate address space.
E. A switch maintains a separate bridging table for each VLAN.
F. VLANs cannot span multiple switches.

Answer: B,D,E

Monday, 28 December 2015

Pass4sure 200-101 Question Answer

Which three statements about RSTP are true? (Choose three.)

A. RSTP significantly reduces topology reconverging time after a link failure.
B. RSTP expands the STP port roles by adding the alternate and backup roles.
C. RSTP port states are blocking, discarding, learning, or forwarding.
D. RSTP provides a faster transition to the forwarding state on point-to-point links than STP does.
E. RSTP also uses the STP proposal-agreement sequence.
F. RSTP uses the same timer-based process as STP on point-to-point links.

Answer: A,B,D                                                                   


At which layer of the OSI model is RSTP used to prevent loops?

A. physical
B. data link
C. network
D. transport

Answer: B

Monday, 7 December 2015

Pass4sure 200-101 Question Answer

Which two states are the port states when RSTP has converged? (Choose two.)

A. discarding
B. listening
C. learning
D. forwarding
E. disabled

Answer: A,D

Friday, 9 October 2015

Pass4sure 200-101 Question Answer

Why has this switch not been elected the root bridge for VLAN1?
 
A. It has more than one interface that is connected to the root network segment.
B. It is running RSTP while the elected root bridge is running 802.1d spanning tree.
C. It has a higher MAC address than the elected root bridge.
D. It has a higher bridge ID than the elected root bridge.

Answer: D


Which switch provides the spanning-tree designated port role for the network segment that services the printers?


 



A. Switch1
B. Switch2
C. Switch3
D. Switch4

Answer: C

Wednesday, 9 September 2015

Pass4sure 200-101 Question Answer

  

Which switch provides the spanning-tree designated port role for the network segment that services the printers?

 

A. Switch1
B. Switch2
C. Switch3
D. Switch4


Answer: C

 

 

 

Refer to the exhibit.

  

 Given the output shown from this Cisco Catalyst 2950, what is the reason that interface FastEthernet 0/10 is not the root port for VLAN 2?


A. This switch has more than one interface connected to the root network segment in VLAN 2.
B. This switch is running RSTP while the elected designated switch is running 802.1d Spanning Tree.
C. This switch interface has a higher path cost to the root bridge than another in the topology.
D. This switch has a lower bridge ID for VLAN 2 than the elected designated switch.

Answer: C

Tuesday, 2 June 2015

200-101 Exam Papers

QUESTION NO: 5

Which two of these statements regarding RSTP are correct? (Choose two.)
 
A. RSTP cannot operate with PVST+.
B. RSTP defines new port roles.
C. RSTP defines no new port states.
D. RSTP is a proprietary implementation of IEEE 802.1D STP.
E. RSTP is compatible with the original IEEE 802.1D STP.

Answer: B, E

 

QUESTION NO:6



Each of these four switches has been configured with a hostname, as well as being configured to run RSTP. No other configuration changes have been made. Which three of these show the correct RSTP port roles for the indicated switches and interfaces? (Choose three.)
 
A. SwitchA, Fa0/2, designated
B. SwitchA, Fa0/1, root
C. SwitchB, Gi0/2, root
D. SwitchB, Gi0/1, designated
E. SwitchC, Fa0/2, root
F. SwitchD, Gi0/2, root

Answer: A, B, F

Sunday, 1 February 2015

200-101 Question Answer

QUESTION NO:3

Which two of these statements regarding RSTP are correct? (Choose two.)

A.    RSTP cannot operate with PVST+.
B.    RSTP defines new port roles.
C.    RSTP defines no new port states.
D.    RSTP is a proprietary implementation of IEEE 802.1D STP.
E.    RSTP is compatible with the original IEEE 802.1D STP.

Answer: BE


QUESTION NO:4

Which port state is introduced by Rapid-PVST?

A.    learning
B.    listening
C.    discarding
D.    forwarding

Answer: C